Slide Lock Installation

Step 1
Screen Shot 2018-10-11 at 1.35.51 PM.png

Close door completely. Keep door closed by fastening “C” clamps on both the left and right door track against the top side of two rollers.

Step 3
Screen Shot 2018-10-18 at 4.38.42 PM.png

Remove old slide lock.

Step 5

To change lock from right side to left:

Step 7
Screen Shot 2018-10-19 at 11.25.10

Remove the bolt holding the slide arm, remove slide arm and replace it in the opening on the opposite hole and replace bolt.

Step 2
Screen Shot 2018-10-18 at 11.56.44

Disconnect power and lifting arm of garage door opener.

Step 4
Screen Shot 2018-10-18 at 4.57.51 PM.png

Replace with new slide lock and existing hardware.

Step 6
Screen Shot 2018-10-19 at 11.23.45

While unlocked remove the catch and throw springs.

Step 8
Screen Shot 2018-10-19 at 11.36.39

Replace both the catch and throw springs on the opposite side from original position.